Rockwell Automation Isomag 4 Universal Guard Safety Switch - Manual (Page 2)

6 Remove the internal cover and connect the
contact terminals as shown. Use the most
convenient of the 3 knock out conduit entry
points.
7
After installation check all of
the interlocked guard doors
to ensure that the machine is
isolated and stopped before
the guard has been opened
a sufficient distance to allow
access to the hazardous
area.
DIMENSIONS
5.25 30
5
81
60.5
5.25
M4
10
18 5.25
18
2
53
121.3
64.3
M5
35.05
13.3
11.5
15
BS 20mm
CONDUIT
ENTRY
20 20
58 38
Safety contacts:
Safety contact gap:
Auxiliary contacts:
Case:
Switch interior:
Protection:
Mounting:
Fixing:
Cover screws:
Cleaning:
Operating temperature:
Operating life:
Conduit entries:
Actuator:
Fixing:
Double positive break, N/O, AC11 500V 1A
250V 2A
100V 5A
DC11 240V 0.5A
> 2 x 2.6mm.
Double positive break, N/C, AC11 500V 1A
250V 2A
100V 5A
DC11 240V 0.5A
Heavy duty die cast alloy, epoxy coated, colour red.
Glass reinforced nylon, self extinguishing.
IP66.
Any position.
2 x M5.
Resistorx anti-tamper.
May be steam cleaned or high pressure hosed.
-35
° C to +80 ° C.
> 10 x 10 6
3 x BS20mm
Pressed steel, chrome plated. Magnet housing
moulded ABS.
2 x M4 Resistorx anti-tamper (supplied).
The Isomag 4 is available with alternative PG11 conduit threads.
Spare Actuator
Stuffing Gland - BS20mm
Stuffing Gland - PG11
Conduit Beacon - Indicator light (supplied without bulb) fits in spare
conduit entry hole
Bulb for above - 24V, 110V, 240V (specify vo;tage).
Security Key
Screwdriver (inc. security key)
ACCESSORIES
TECHNICAL SPECIFICATIONS
Drg no. 10506/0
11 12
22 24
SAFETY
CIRCUIT AUX
CIRCUIT
R