Barco MIVD 1218 - Manual (Page 24)

User manual MIVD 1218 24
Auto..........................The display selects portrait or landscape
reproduction automatically, depending on the
orientation of the panel.
Portrait......................The image is reproduced in portrait orientation.
Landscape: The image is reproduced in
landscape orientation.
De-interlacing*
* Not in DVI mode – Visible only when the input signal is interlaced
This setting allows you to select the algorithm used to convert non-
interlaced into interlaced signals.
These are the possibilities:
Line rep. ...................Use the line repetition algorithm for moving
images. As a drawback, this algorithm may
cause flicker.
Field insert................Use this algorithm for static images
Median......................Use this algorithm for images containing static
and moving parts
Fuzzy........................This motion-adaptive algorithm, using fuzzy
logic, analyses the image content and selects a
de-interlacing method automatically.
In nearly all circumstances, this method gives
the best result and is the preferred de-
interlacing algorithm.
3.8. Advanced settings
To change the advanced settings:
1 Turn the control wheel to display the Advanced Settings menu.
2 Click the control wheel to enter the menu.
3 Turn the control wheel to select one of the categories: CAL
options, Meas. window, OSD, ALC, Scan mode, or Factory Reset.
4 Click the control wheel to enter the selected settings menu.
5 Turn the control wheel to change the setting.
6 Click the control wheel to confirm the change.
CAL options
Here you can change parameters for phase and level calibration
***MAIN MENU****
Adv. settings