Barco MIVD 1218 - Manual (Page 19)

User manual MIVD 1218 19
Note:
The calibration of the video levels determines the calibrated position
or default setting of contrast and brightness. The black level
calibration determines the brightness, the white level calibration
determines the contrast.
3.5. Getting information
The Information menu allows you to get a lot of information about the
display and the connected signals.
To read the information:
1 Turn the control wheel to display the Information menu.
2 Click the control wheel to enter the menu.
3 Turn the control wheel to select one of the categories: General or
Timing.
4 Click the control wheel to enter the selected information menu.
5 Turn the control wheel to scroll through the information.
General information
Input .........................Displays the currently selected input: analog
composite video or DVI (digital)
Current Mode ...........Displays the currently selected memory scan
mode
ALC ..........................Displays if the Ambient Light Compensation
(ALC) is on or off. A check mark (3) means on,
a cross (2) means off
Power Led ................Displays if the power LED on the front is
currently switched on or off. A check mark (3)
means on, a cross (2) means off
Interlaced* ................Indicates if the display is processing the
selected input signal in interlaced or non-
interlaced mode. A check mark (3) means
Interlaced, a cross (2) means non-interlaced
Filter* ........................Displays which internal low-pass filter is
currently selected
Serial #. ....................Indicates the display serial number
SW ...........................Displays the current internal software version
***MAIN MENU****
Information