Rockwell Automation 1440-VDRP06-00RH XM-162 Direct Vibration Modules - Manual (Page 9)

Rockwell Automation Publication GMSI10-IN026C-EN-P - February 2014 9
XM-160, XM-161, and XM-162 Direct Vibration Modules
Install the XM Serial Configuration Utility Software
The XM Documentation and Configuration Utility CD is packaged with the XM modules. It contains the XM Serial
Configuration Utility software, a set of user guides, hazardous location installation drawings, and electronic data sheet
(EDS) files that are used by network configuration tools such as RSNetWorx™ for DeviceNet software. The user guides are
in portable document format (PDF), and must be viewed with Adobe Acrobat Reader software.
To install the XM Serial Configuration Utility software, follow these steps.
1. Insert the XM Documentation and Configuration Utility CD-ROM into the CD-ROM drive.
2. Follow the instructions that appear to install the XM Serial Configuration Utility.
3. When you are finished installing the software, remove the XM Documentation and Configuration Utility
CD-ROM from the CD-ROM drives; store it in a safe place.
Specifications
The following table lists the technical specifications for the XM-16X modules.
If autorun is Then
Enabled The Setup program starts automatically and the XM Serial Configuration Utility opening screen appears.
Disabled Follow these steps.
1. Click Start, and then click Run.
The Run dialog box appears.
2. In the Open box, type x:\autorun, where x is the letter of the drive containing the XM Documentation and
Configuration Utility CD-ROM.
3. Click OK.
The XM Serial Configuration Utility opening screen appears.
Attribute XM-16X
Temperature, operating
IEC 60068-2-1 (Test Ad, Operating Cold),
IEC 60068-2-2 (Test Bd, Operating Dry Heat),
IEC 60068-2-14 (Test Nb, Operating Thermal Shock) -20…65 °C (-4…149 °F)
Temperature, surrounding air, max 65 °C (149 °F)
Temperature, nonoperating
IEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold),
IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating Dry Heat),
IEC 60068-2-14 (Test Na, Unpackaged Nonoperating Thermal Shock) -40…85 °C (-40…185 °F)
Relative humidity
IEC 60068-2-30 (Test Db, Unpackaged Damp Heat) 5…95% noncondensing
Vibration
IEC 60068-2-6 (Test Fc, Operating) 2 g @ 10…500 Hz
Shock, operating
IEC 60068-2-27 (Test Ea, Unpackaged Shock) 15 g
Shock, nonoperating
IEC 60068-2-27 (Test Ea, Unpackaged Shock) 20 g