Operation description for gplprint, Operation instructions for gplprint – Rockwell Automation T7835 ICS Regent+Plus Software Validation Package for Winternet User Manual
Page 13

Software Validation Package for Winterpret (T3835)
P D - 7 0 4 5 M a r c h , 0 6
13
Import template definitions for REGENTA Tue Mar 15 15:24:31 1994
Binary image: C:\WINTERP\REGENTA\2NETWORK\2NWIMAGE.BIN Mon Mar 14 10:24:31 1994
Provider node 2
Provider template CRC = 0x9f41
Name Type Power Up Val Timeout Val Timeout Action
No imports from this node.
Provider Node 5
Provider template CRC = 0xe8b5
Name Type Power Up Val Timeout Val Timeout Action
CR1 SHCR 0 --- HOLD LAST VALUE
CR10 SHCR 0 --- HOLD LAST VALUE
CR2 SHCR 0 1 USE TIMEOUT DEFAULT
FP9 SHFP 2.0032 -2.0032 USE TIMEOUT DEFAULT
Summary: All addresses found.
Figure 6. Sample Listings for GPLCHECK Import File.
Operation Description for GPLPRINT
Gplprint.exe creates an ASCII text file listing the
W
INTERPRET
network configuration. The name of the
configuration file and its timestamp are listed in the file,
followed by a list of projects participating in the network, and
finally a list of variables provided by each of the participating
projects. The program needs the name of the output file
receiving the configuration listing.
Operation Instructions for GPLPRINT
Start gplprint.exe from DOS in the W
INTERPRET
system
directory and provide the listing file name. Following are
program prompts; gplprint messages are shown in bold text
and user inputs are show in italics.