Rockwell Automation 1786-series ControlNet Fiber Media Planning and Installation Guide - Manual (Page 11)

Rockwell Automation Publication CNET-IN001C-EN-P - October 2011 11
Chapter
1
Get Started with the ControlNet Network
Fiber Media System
This chapter is an overview of the process you need to follow when you apply
fiber media. Some of the information in this chapter repeats in subsequent
chapters for instructional purposes.
Why Choose a Fiber-optic
Media System? Fiber media holds many advantages over traditional copper media. Since
fiber-optic media transmits digitized information via light pulses over glass or
plastic fibers, it avoids many of the problems common with copper applications.
In certain applications, the advantages of fiber over coax media outweigh the
higher cost of fiber media and components.
Topic Page
Why Choose a Fiber-optic Media System? 11
Analyze Your Network 12
Identify Fiber Media Components 12
Determine Network Topology 15
Plan the Installation of the Fiber Media Components 19
Choose the Fiber Media System Composition 19
Configure the Media in RSNetWorx for ControlNet Software 25
Terminate Your Fiber Cable 26
Test Your Fiber Media Connections and Segments 26
Power Your Repeaters 26
Verify Your Network 26
ATTENTION: If you are using fiber in an intrinsically safe area, consult
with your local safety coordinator.