Rockwell Automation MMCL Using the Mining, Mineral, and Cement Library (MMCL) in FactoryTalk View Site Ed - Manual (Page 17)

Publication RA-UM001B-EN-P - November 2010
Developing an HMI Application 17
Images
In this section bitmap images, which are used in the display templates, are
imported into the project.
1. Right-click Images and select Add Component Into Application.
2. Browse in the Library Project to the Images folder.
3. Select all the files in the folder and click Open.
The images are imported into your project.
Macros
In this section macros, which provide Startup and Shutdown batch commands,
are imported into the project.
1. Right-click Macro and select Add Component Into Application.
2. Browse in the Library Project and open the Mcr folder.
3. Select all the files in the folder and click Open.
The macros are imported into your project.
Events
In this section an event file, for communication supervision, is imported into
the project.
1. Right-click Events and select Add Component Into Application.
2. Browse in the Library Project and open the EDS folder.
3. Select the .eds file and click Open.
The event file is imported into your project.