Rockwell Automation T3833 ICS Regent Math Package for Winterpret - Manual

ICS Regent
®
PD-6043
Industrial Control Services 1
Math Package for W
INTERPRET
Floating Point Math Function Block
(T3833)
Issue 1, March, 06
The Math package for W INTERPRET is an add-in software
package which allows the user to create Floating Point Math
function blocks for Regent application programs. When
installed on the PC, the math package is seamlessly
integrated with the base W
INTERPRET software.
Floating point math function blocks are used to perform
mathematical calculations that require floating point
precision or use values that exceed the 16-bit signed integer
range (-32768 to +32767) used in ladder logic math
operations. The expressions that can be used in floating point
math function blocks include addition, subtraction, division,
multiplication, exponentiation, logarithms, and square root.
Software Installation
The Math package is installed on the PC running the
W
INTERPRET application software. The W INTERPRET base
package provides the necessary installation software to install
this add-in math package. The math package should be
installed at the same time or after you have installed the
W
INTERPRET base package.
Installation Procedure
The files on the Math package diskette are in compressed
form. You cannot simply copy the files to your hard drive —
they must be decompressed before they will run. You must
have the W
INTERPRET base package distribution disk in order
to run the setup procedure to install the Math package.
To install the Math package, use the following sequence:
Important!