Rockwell Automation T8170 Trusted Gateway Module - Manual (Page 18)

Trusted
TM
Module T8170
Issue 10 Apr 10 PD-8170 18
3.2. INI File Format
There are no sections in the INI File used by the Gateway module.
3.3. Trusted
TM
Configuration Tool
The Configuration Tool is not used to configure the Gateway module.
3.4. IEC1131 Toolset Configuration
The IEC1131 Toolset is not used to configure the Gateway module.
3.5. Optional OPC Server
3.5.1. Installing and Configuring the Optional OPC Server
If the OPC Server is to be installed, the Gateway Module Computer Name and IP Addresses must be
configured, as described in section 3.1 above.
Connect to the Gateway module as described in section 3.1.1 above. Insert the OPC Server installation
CD into the local computer’s CD-ROM drive (or another computer which is accessible on the same
network) and cancel the automatic installation. Open Windows Explorer in the Remote Desktop
window to the Gateway module, and locate the CD on the computer by searching under My Network
Places/Network Neighbourhood for the computer’s CD-ROM drive.
Figure 8 Locating local CD-ROM drive