Rockwell Automation T8170 Trusted Gateway Module - Manual (Page 16)

Trusted
TM
Module T8170
Issue 10 Apr 10 PD-8170 16
NOTE: If the IP Address of the Ethernet port that the Remote Desktop Connection is using is changed,
the Remote Desktop Connection will close. To reconnect, change the IP Address of the PC and
connect again using the Remote Desktop Connection.
3.1.3. Gateway Computer Name/Workgroup Configuration
To change the Gateway Module’s computer name and/or connect to a workgroup (to fit with the
network design in use), use the “System Properties” window. Within the remote desktop window, open
Control Panel and select “System”. Select the “Computer Name” tab and click “Change”. Change the
Computer Name and the Workgroup (if necessary). Click OK twice to close all the dialog boxes. Do
not reboot.
3.1.4. User Account Configuration
If required, additional users on the Gateway Module can be created. Within the remote desktop
window, open Control Panel and select “User Accounts”. Click “Create a new account” and enter the
information requested in the dialogue that follows. The user must be part of the Administrators group.
Ensure that a password is set, otherwise the Remote Desktop Connection will be unavailable.