Rockwell Automation CF800 Trusted Cabinets - Manual (Page 12)

Trusted
TM
Cabinets CF800
Issue 6 Sep 05 PD-CF800 12
Five types of cabinet door are available as detailed below.
Item Part No. Description
1 DP(E) Door Plain Universal
2 DV(E) Door Vented Universal
3 DM(E) Door Matrix Universal
4 DGR(E) Door Glazed Right-Hand Hinge
5 DGL(E) Door Glazed Left-Hand Hinge
Doors are supplied fully assembled and hinged to the front or rear main frames as specified. The
doors are hinged on the right-hand side as standard. To modify a universal door (the hinges on glazed
doors cannot be changed over) so that it is hinged on the left-hand side, proceed as follows:
1. Remove the door from the main frame by removing the hinge pins.
2. Remove the hinges and catches from the main frame and change their positions over.
3. Turn the door through 180 degrees and fit it to the main frame. Replace the hinge pins
removed in 1. above.
4. Door handles are fitted for right-hand hinge as standard. To change the handle for left-hand
hinge, remove the hexagonal head centre screw and the two pan head self tapping screws
securing the handle to the door. Turn the handle and latch mechanism through 180
0 and refit
the screws.
5. Close and check the door for alignment. Adjust if necessary.
6. Fully tighten all hinge and catch fixings to complete the assembly.
Notes: Door locks have key number 1333 as standard.