Rockwell Automation 2705-APG RediPanel Plug and Go Products - Manual (Page 20)

Bulletin 2705
RediPANEL 800A Push Button Modules
User Manual
20
Installing or Replacing Push Button Legends (cont’d)
3. Insert the new legend and “snap” the two pieces back together.
4. Replace the keyed lens carrier into the push button.
5. Check for proper operation of the push button.
ЛЛ
ЛЛ ЛЛ
ЛЛ ЛЛ
ЛЛ
Л
STEP 3
STEP 5
Lamp Replacement
!
ATTENTION: To avoid electrical shock or unintended operation
of the equipment, disconnect power before servicing.
1. Remove the lens carrier from the push button on the module by gently
prying it out on either side of the carrier with a screwdriver.
!
ATTENTION: DO NOT use the slot on either side of the lens
carrier for prying as it may break the assembly.
2. Remove existing lamp from socket.
!
ATTENTION: DO NOT use the screwdriver or any other metal
object to remove the bulb. Use ONLY the 800M-N5 lamp
replacement tool.