Rockwell Automation 2361 Tachometer Feedback Board Replacement User Manual
Tachometer feedback board replacement
R
EPLACEMENT
K
IT
I
NSTRUCTIONS
Tachometer Feedback Board
Replacement
Contents
This document shows how to remove and replace a tachometer
feedback board in a 1395 DC drive.
What This Kit Contains
Using the table below, verify that you have received the appropriate
items in your kit:
Other Items Needed
Before you begin, be sure you also have the following:
•
Tools you will need to:
•
Loosen and tighten screws (slotted screwdriver)
•
Test for voltage (multimeter)
•
Documentation:
•
Your drive system schematics
•
Publication 1395-5.40, Bulletin 1395 Digital DC Drive–
User Manual
•
Publication 2361-5.01, Bulletin 1395 Digital DC Drive in
Bulletin 2361 Motor Control Center for Drive Systems–
User Manual
•
Publication 1395-5.12, 1395 Discrete Adapter Board–
Installation and Operation Manual
•
Publication 1395-5.55, Bulletin 1395 Digital Reference
Adapter Board–Hardware/Software Reference Manual
For this part:
You should receive this quantity:
tachometer feedback board
1
electrostatic discharge (ESD) strap
1
As applicable