Rockwell Automation 2085-IRT4 Micro800 4-channel Thermocouple/RTD Input Module - Manual (Page 6)

6 Micro800 4-channel Thermocouple/RTD Input Module
Publication 2085-IN007A-EN-P - September 2012
Mount the Module
For more information on proper grounding guidelines, see the Industrial Automation Wiring
and Grounding Guidelines, publication
1770-4.1 .
Module Spacing
Maintain spacing from objects such as enclosure walls, wireways and adjacent equipment. Allow
50.8 mm (2 in.) of space on all sides for adequate ventilation, as shown.
Module Description
Description Description
1 Mounting screw hole / mounting foot 5 Module interconnect latch
2 Removable Terminal Block (RTB) 6 DIN rail mounting latch
3 Thermistor 7 I/O status LED
4 RTB hold down screws
This equipment is sensitive to electrostatic discharge (ESD).
Follow ESD prevention guidelines when handling this equipment.
ATTENTION: To comply with UL restrictions, this equipment must be powered from a source
compliant with the following:
Class 2 or Limited Voltage/Current.
ATTENTION: To comply with the CE Low Voltage Directive (LVD), all connected I/O must be
powered from a source compliant with the following:
Safety Extra Low Voltage (SELV) or Protected Extra Low Voltage (PELV).