beautypg.com

Rockwell Automation 2090-CPxxx Standard Power Cables with SpeedTec DIN Connector Type 940 Installation Instruct User Manual

Installation instructions, About standard power cables

background image

Installation Instructions

Standard Power Cables with
SpeedTec DIN Connector Type 940

Catalog Number 2090-CPBM7DF-06AAxx, 2090-CPBM7DF-08AAxx,
2090-CPBM7DF-10AAxx, 2090-CPWM7DF-08AAxx,
2090-CPWM7DF-10AAxx

About Standard Power Cables

Standard motor power cables, with or without brake connections, have a 40 mm (1.6 in.)
SpeedTec DIN connector at the motor end, and flying leads at the drive end. These cables can be
bent or reformed during installation or maintenance, but should not be used in a continuous flex
operation.

Topic

Page

Important User Information

2

Before You Begin

3

Install Cables

4

Connector Pinout Diagrams

6

Specifications 7

Additional Resources

8