With major offices worldwide – Rockwell Automation 8510SA-CMBC AC Spindle Drive Connector Kits Instructions User Manual
Page 2

8510 Connector Kits
Instructions
Figure 1
Connector Assembly
On Solder Type Pin, Apply Solder
to Assure Good Connection
Bend Over Wire Insulation
Locking Tab
Do Not Bend!
Loop
A1
A2
A3
A4
A5
B2
B3
B4
B5
B
A
B1
Note: See end of connector for A/B
labels, numbers are labeled on side.
4. Insert the wires with attached pins into the connector location specified
in the 8510 User Manual. The connector pin designations are shown in
Figure 1.
Important: Use care when orienting and inserting pins into connector.
Once pins have “snapped” into place, removal can be difficult.
5. The connector body is keyed and can only be inserted into the mating
housing one way. Depress the locking tabs on the ends of the connector
body to unplug the connector.
Publication 8510-5.31 – July, 1993
P/N 155556
Copyright 1993, Allen-Bradley Company, Inc. Printed in U.S.A.
Algeria • Argentina • Australia • Austria • Bahrain • Belgium • Brazil • Bulgaria • Canada • Chile • China, PRC • Colombia • Costa Rica • Croatia • Cyprus • Czech Republic
• Denmark • Ecuador • Egypt • El Salvador • Finland • France • Germany • Greece • Guatemala • Honduras • Hong Kong • Hungary • Iceland • India • Indonesia • Israel •
Italy • Jamaica • Japan • Jordan • Korea • Kuwait • Lebanon • Malaysia • Mexico • New Zealand • Norway • Oman • Pakistan • Peru • Philippines • Poland • Portugal •
Puerto Rico • Qatar • Romania • Russia–CIS • Saudi Arabia • Singapore • Slovakia • Slovenia • South Africa, Republic • Spain • Switzerland • Taiwan • Thailand • The
Netherlands • Turkey • United Arab Emirates • United Kingdom • United States • Uruguay • Venezuela • Yugoslavia
World Headquarters, Allen-Bradley, 1201 South Second Street, Milwaukee, WI 53204 USA, Tel: (1) 414 382-2000 Fax: (1) 414 382-4444
Allen-Bradley has been helping its customers improve productivity and quality for 90 years.
It designs, manufactures and supports a broad range of control and automation products
worldwide. They include logic processors, power and motion control devices, man-machine
interfaces and sensors. Allen-Bradley is a subsidiary of Rockwell International, one of the
world’s leading technology companies.
With major offices worldwide.