Rockwell Automation 9303 Drive Tools SP / Drive Executive Installation - Manual (Page 2)

2 DriveTools SP / DriveExecutive / DriveExecutive Lite Software
d. When a message displays indicating that the operation was completed
successfully, click OK.
e. Click Close to close the RSLinx Backup/Restore dialog.
f. Open the Windows Control Panel.
g. Double-click on Add/Remove Programs.
h. Select RSLinx and then click Add/Remove.
i. Respond to the prompts to remove RSLinx.
3. If you removed an application in step 1 or 2, restart your PC.
4. If you are using Windows 2000 and the service pack is less than 4, you must
first install service pack 4 before proceeding. Please visit
www.microsoft.com
for appropriate service packs. After installing the service pack, restart your
PC.
5. Insert the DriveExecutive installation CD into the CD-ROM drive. The
installation launcher should open automatically if autorun is enabled on your
PC.
6. If you would like to have the DriveTools feature for Factory Talk security, you
will need to have FactoryTalk CPR 7 or CPR 9 installed before installing
DriveTools or DriveExecutive. The FactoryTalk Services Platform 2.10
(CPR9) install can be launched off of the installation launcher or run from
…\FTSP_2.10\Setup.exe. FactoryTalk Security can be configured after
installing DriveTools or DriveExecutive.
7. The DriveTools or DriveExecutive can be run from the installation launcher. If
that does not launch, run …\DriveExecutive\setup.exe or
…\DriveTools\setup.exe on your CD.
8. Follow the instructions in the Setup Wizard and respond to the prompts. The
serial number for DriveExecutive or DriveTools SP is provided in the
packaging. For DriveExecutive Lite, use your RSLogix 5000 or RSNetWorx
MD serial number. If FactoryTalk Services Platform is installed there will be
an option to install the DriveTools FactoryTalk Security Feature.
9. Restart your PC.
10. To configure FactoryTalk Security, launch the FactoryTalk Administration
console for the network directory. DriveTools has feature security under
System -> Policies -> Product Policies -> DriveTools.
11. 11. If you do not already have Microsoft Internet Explorer version 6 or later
installed on your PC, run …\IE60\IE6setup.exe on your CD. (Internet Explorer
is required to use help and other features of the software.) Follow the
instructions in the Setup Wizard and respond to prompts.