Rockwell Automation 8720MC Control Board Installation Instructions - Manual (Page 3)

8720MC Control Board 3
Publication 8720MC-IN003A-EN-P — January 2005
Complying with European Union Directives
If this product is installed within the European Union or EEC regions
and has the CE mark, the following regulations apply.
EMC Directive
This product is tested to meet Council Directive 89/336/EEC
Electromagnetic Compatibility (EMC) using the following standards, in
whole or in part:
•
EN 50081-2 EMC - Emission Standard, Part 2 - Industrial
Environment
•
EN 50082-2 EMC - Immunity Standard, Part 2 - Industrial
Environment
The product described in this manual is intended for use in an industrial
environment.
Low Voltage Directive
This product is tested to meet Council Directive 73/23/EEC Low Voltage
Directive. The EN 60204-1 Safety of Machinery-Electrical Equipment of
Machines, Part 1-Specification for General Requirements standard
applies in whole or in part. Additionally, the standard EN 50178
Electronic Equipment for use in Power Installations applies in whole or
in part.
This equipment is classified as open equipment and must be mounted
in an enclosure during operation to provide safety protection.