Rockwell Automation AutoMax R-Net Processor Module - Manual (Page 13)

3Ć1
3.0 INSTALLATION
This section describes how to install and replace the AutoMax RĆNet
Processor module. For more information regarding the RĆNet
network, refer to the RĆNet Application Manual (JĆ3075).
DANGER
ONLY QUALIFIED ELECTRICAL PERSONNEL FAMILIAR WITH THE
CONSTRUCTION AND OPERATION OF THIS EQUIPMENT AND THE HAZARDS
INVOLVED SHOULD INSTALL, ADJUST, OPERATE, AND/OR SERVICE THIS
EQUIPMENT. READ AND UNDERSTAND THIS MANUAL IN ITS ENTIRETY
BEFORE PROCEEDING. FAILURE TO OBSERVE THIS PRECAUTION COULD
RESULT IN SEVERE BODILY INJURY OR LOSS OF LIFE.
DANGER
THE USER IS RESPONSIBLE FOR CONFORMING WITH THE NATIONAL
ELECTRICAL CODE AND ALL OTHER APPLICABLE LOCAL CODES. WIRING
PRACTICES, GROUNDING, DISCONNECTS, AND OVERĆCURRENT
PROTECTION ARE OF PARTICULAR IMPORTANCE. FAILURE TO OBSERVE
THIS PRECAUTION COULD RESULT IN SEVERE BODILY INJURY OR LOSS OF
LIFE.
WARNING
INSERTING OR REMOVING A MODULE MAY RESULT IN UNEXPECTED
MACHINE MOTION. POWER TO THE MACHINE SHOULD BE TURNED OFF
BEFORE INSERTING OR REMOVING THE MODULE. FAILURE TO OBSERVE
THESE PRECAUTIONS COULD RESULT IN BODILY INJURY.
WARNING
ALTHOUGH THE RĆNET NETWORK INCLUDES CRC CHECKSUMS AND OTHER
DIAGNOSTICS TO ENSURE THE INTEGRITY OF DATA TRANSFERRED, IT IS
POSSIBLE FOR BAD DATA TO PASS WITHOUT DETECTION IN CASES WHERE
NOISE IS INDUCED WHICH IS NOT RANDOM BUT RESEMBLES VALID DATA.
ADHERE TO THESE INSTALLATION INSTRUCTIONS. FAILURE TO OBSERVE
THIS PRECAUTION COULD RESULT IN BODILY INJURY.
CAUTION
THIS MODULE CONTAINS STATICĆSENSITIVE COMPONENTS. DO NOT TOUCH
THE CONNECTORS ON THE BACK OF THE MODULE. WHEN NOT IN USE, THE
MODULE SHOULD BE STORED IN AN ANTIĆSTATIC BAG. THE PLASTIC COVER
SHOULD NOT BE REMOVED. FAILURE TO OBSERVE THIS PRECAUTION
COULD RESULT IN DAMAGE TO OR DESTRUCTION OF THE EQUIPMENT.