Rockwell Automation 8520 9/PC CNC Tool Path Graphics Programming Manual - Manual (Page 7)

9/PC CNC Tool Path Graphics Programming Manual 7
Publication 8520-PM097A-EN-P - September 2001
Activating Tool Path Graphics
To run Tool Path Graphics:
1. Press the {PRGRAM MANAGE} softkey.
2. Select {ACTIVE PRGRAM}. Use the up and down cursors to choose a part program
to activate.
3. Select {T-PATH GRAPH}.
OR
1. Press the {PRGRAM CHECK} softkey.
2. Select {T PATH GRAPH}.
The graphics display appears. The graphics you select remain active until you disable
graphics.
3. Press the button to run the part program.