Rockwell Automation 2090 Low Profile Connector Kits Install Instructions - Manual

Installation Instructions
Low-profile Connector Kits
Catalog Numbers 2090-K6CK-D15F, 2090-K6CK-D15M, 2090-K6CK-D15MF,
2090-K6CK-D26M
About the Low-profile Connector Kits
Install the Low-profile Connector Kit
Refer to your drive user manual for additonal information on installing the connector kit.
Connector Kit Cat. No. Application Description
2090-K6CK-D15F 15-pin, female, D-sub connector for auxiliary feedback.
2090-K6CK-D15M 15-pin, male, D-sub connector for motor feedback.
2090-K6CK-D15MF 15-pin, male, D-sub connector for motor feedback with filter for thermal switch
circuit.
2090-K6CK-D26M 26-pin, male, D-sub connector for user I/O.
Attribute
2090-K6CK-D15F, 2090-K6CK-D15M, 2090-K6CK-D15MF,
2090-K6CK-D26M
Cable diameter 4…10 mm (0.16…0.39 in.)
Recommended torque
Mounting screw
Terminal screws
Clamp and cover screws 0.4 N•m (3.5 lb•in)
0.2 N•m (2.1 lb•in)
0.4 N•m (3.5 lb•in)
Screw terminal wire size 0.06…1.31 mm
2
(30…16 AWG)
Recommended wire strip length 5 mm (0.2 in.) single conductor