Rockwell Automation 1797-PS2E2 FLEX Ex Power Supply - Manual (Page 3)

FLEX Ex Power Supply 3
Publication 1797-5.8 - June 2010
About the Power Supply
The power supply is an essential component in the operation of an
intrinsically safe system. It must isolate the unsafe incoming power from the
control system and limit the available energy to IS-safe levels.
No other power sources are needed to operate any components attached to
the FLEX Ex system in the hazardous area. Power for valves, actuators, or
transmitters come from the FLEX Ex modules.
ATTENTION
This equipment is considered Group 1, Class A industrial equipment
according to IEC/CISPR Publication 11. Without appropriate
precautions, there may be potential difficulties ensuring
electromagnetic compatibility in other environments due to
conducted as well as radiated disturbance.
This equipment is supplied as enclosed equipment. It should not
require additional system enclosure when used in locations
consistent with the enclosure type ratings stated in the
Specifications section of this publication. Subsequent sections of
this publication may contain additional information regarding
specific enclosure type ratings, beyond what this product provides,
that are required to comply with certain product safety certifications.
1797-PS2E2
30686