Rockwell Automation 57C409 2 Channel Analog Input Module - Manual (Page 7)

1Ć1
1.0 INTRODUCTION
The products described in this instruction manual are manufactured
or distributed by Reliance Electric Company or its subsidiaries.
This 2 Channel Analog Input Module is used to input analog signals
to a local rack in the DCS 5000/AutoMax system. The module
contains two channels that can be converted as often as once every
500 microĆseconds. Each channel provides 12 bit conversion plus
sign, 100% overrange, and userĆprogrammable filters and conversion
rates.
There is one isolated common for the two input channels. Inputs to
the module can be either +1 volt +5 volts, +10 volts or 4Ć20 ma. The
module can be configured to interrupt on every conversion.
Typically, this module is used to read analog voltages from
potentiometers, tachometers, drive control systems, and process
control systems.
This manual describes the functions and specifications of the
module. It also includes a detailed overview of installation and
servicing procedures, as well as examples of programming methods.
Related publications that may be of interest:
D JĆ2611
DCS 5000 PRODUCT SUMMARY
D JĆ3675 DCS 5000 ENHANCED BASIC LANGUAGE
INSTRUCTION MANUAL
D JĆ3676 DCS 5000 CONTROL BLOCK LANGUAGE
INSTRUCTION MANUAL
D JĆ3677 DCS 5000 LADDER LOGIC LANGUAGE
INSTRUCTION MANUAL
D JĆ3630 ReSource AutoMax PROGRAMMING
EXECUTIVE INSTRUCTION MANUAL VERSION 1.0
D JĆ3635 DCS 5000 PROCESSOR MODULE INSTRUCTION
MANUAL
D JĆ3649 AutoMax CONFIGURATION TASK MANUAL
D JĆ3650 AutoMax PROCESSOR MODULE INSTRUCTION
MANUAL
D JĆ3675 AutoMax ENHANCED BASIC LANGUAGE
INSTRUCTION MANUAL
D JĆ3676 AutoMax CONTROL BLOCK LANGUAGE
INSTRUCTION MANUAL
D JĆ3677 AutoMax LADDER LOGIC LANGUAGE
INSTRUCTION MANUAL
D JĆ3684 ReSource AutoMax PROGRAMMING
EXECUTIVE INSTRUCTION MANUAL VERSION 2.0
D JĆ3750 ReSource AutoMax PROGRAMMING
EXECUTIVE INSTRUCTION MANUAL VERSION 3.0
D IEEE 518 GUIDE FOR THE INSTALLATION OF ELECTRICAL
EQUIPMENT TOMINIMIZE ELECTRICAL NOISE
INPUTS TO CONTROLLERS FROM EXTERNAL
SOURCES