Rockwell Automation 2707-M232P3xX, -M485P3X DTAM Micro Operator Interface Installation Instructions User Manual
Dtam micro operator interface
DTAM Micro Operator
Interface
(Catalog Nos. 2707-M232P3xX, -M485P3X)
Installation Instructions
This document describes how to install a DTAM Micro terminal and
connect power.
•
Wiring and Safety Guidelines
•
Enclosures
•
Equipment Required
•
Clearances
•
Mounting Dimensions
•
Installation
•
Wire and Cable Length Restrictions
•
Connecting Power
•
Powerup Sequence
•
Upload/Download DIP Switch Settings
•
Upload/Download Connections
•
Connecting to Devices
•
Specifications
•
Agency Ratings
•
European Union Directive Compliance
For more information on the DTAM Micro terminal, refer to the
following publications.
•
DTAM Micro User Manual
2707-803
•
DTAM Micro DeviceNet Operator Interface 2707-803.5
These publications are available for viewing and download from the
Rockwell Automation/Allen-Bradley Website at www.ab.com.
Document Outline
- 2707-IN006B-EN-P, DTAM Micro Operator Interface Installation Instructions
- Wiring Guidelines
- Safety Guidelines
- Enclosures
- Equipment Required
- Clearances
- Mounting Dimensions
- Cutout Template
- Installation
- Wire and Cable Length Restrictions
- Connecting Power
- Powerup Sequence
- Upload / Download Connections
- Connecting to Devices
- DTAM Micro Specifications
- Agency Ratings
- European Union Directive Compliance
- Back Cover