Rockwell Automation 2100 CENTERLINE MCC Installing a Vertical Grounding Strap - Manual (Page 4)

Publication 2100-IN066A-EN-P—August 2006 4 Copyright © 2006 Rockwell Automation, Inc. Printed in the U.S.A.
Supersedes Publication 2400-5.5 - October 1990
Figure 2 Installing a vertical grounding strap in a section with no horizontal
ground bus
Vertical Bus Cover
Tab
Knock-out Hole
Support Channel
Left
Sideplate
Unit Support Pan
Parts List:
A. Vertical grounding strap (1)
C. 1/4-20 x 1/2” thread-forming screw
(7)
D. Grounding cable (1)
E. 1/4-20 x 1” hex head screw (1)
F. 1/4” flat washer (1)
G. 1/4” lock washer (1)
H. 1/4-20 nut (1)
Note: Additional parts are included
in this kit, but are not used if a
horizontal ground bus is not
present. Refer to Figure 1 for
additional parts listing.