Rockwell Automation 2090-CTHP8 Kinetix 6000M Hybrid Power Terminator Installation Instructions - Manual

Installation Instructions
Kinetix 6000M Hybrid Terminator
Catalog Number 2090-CTHP8
About the Hybrid Terminator
A Kinetix ® 6000M integrated drive-motor system shares DC bus and control power, system
status, and safety signals through a daisy-chain of hybrid cables between each integrated
drive-motor (IDM) in the drive system.
The 2090-CTHP8 hybrid terminator is a male M23 connector with a backshell cover that seals
the connector. The hybrid terminator is installed on the final IDM unit, as shown in the Kinetix
6000M Cable Routing Diagram diagram on
page 4 . It terminates the communication bus and
returns the IDM system status signal to the IDM power interface module (IPIM).
2090-CTHP8 Hybrid Terminator
Topic Page
Important User Information 2
Before You Begin 3
Installing the Hybrid Terminator 4
2090-CTHP8 Terminator Schematic and Pinout 5
Specifications 6
Additional Resources 6