Rockwell Automation 4000 Series 4000 LED Universal Control Bases, Open and Closed Types - Manual

Installation Instructions
Series 4000 LED Universal Control Bases, Open and Closed Types
IMPORTANT: SAVE THESE INSTRUCTIONS FOR FUTURE USE.
Features
• Universal control base takes all Series 4000 LED plug-in control
function modules
• Compact design-requires minimum panel space
• All molded parts of rugged, impact resistant Noryl
• Heavy-duty, easy-to-wire terminal connections with industrial
spacings
• Positive guidance for insertion of plug-in control function
module
• Positive locking of plug-in module alter insertion
• Gold plated, spring loaded connectors between control base and
plug-in module ensures circuit continuity and reliability
• Plug-In, heavy duty DPDT output relay with positive lock-in
feature. Solid stale outputs available as accessories
Description
The Series 4000 LED universal control base combined with any Series
4000 LED plug-in control function module achieves a new dimension
in compact, versatile and dependable photoelectric controls.
This forward-looking modular design concept simplifies pre­ engineering
for preparing wiring diagrams, panel and field wiring, and production
downtime for field changes when function requirements are changed.
The universal control base, nominally 3 in. wide by 5 in. high (76 x 127
mm), is the power supply for the LED light source, the plug-in control
function module and the output relay. It is molded of rugged high-
impact-strength Noryl.
All external connections are made to a heavy duty, barriered, easy-to-
wire, molded Noryl terminal board with industrial spacings between
terminals. Note that the high voltage and low voltage connections are
isolated from each other. The terminals are #8-32 nickel plated, solid
brass, pressure type with non­ rotating clamps on the screws, which will
accept up to two #12 AWG (19 strand, 3/64 in. insulation) wires or
crimp-type lug connectors.
It includes a guide for the plug-in control function module to assure
proper module insertion, positive alignment and mating of the control
connectors. The connectors between module and base are both gold
plated and spring loaded to insure circuit continuity and reliability. The
Plug-In Module is positively and automatically latched into the module
holders after insertion. Unlatching for inspection or removal can be
performed without the use of tools.
The standard output device is a heavy duty, plug-in DPDT industrial
type relay, conservatively rated at 5 amps, 120V AC and 2.5 amps at
230V AC (non-inductive). Solid state plug-in relay, logic and open
collector adapters are available as accessories. A hold­ down clip on the
control base over the output device assures reliable operation in high
vibration industrial environments.
The Series 4000 LED universal control base is available as chassis only
(open type) or enclosed in a general purpose NEMA 1 enclosure with
knockouts on top, bottom and sides. Special environmental NEMA 3, 4,
5, 12, and 13 and hazardous location NEMA 7 and 9 enclosures are
available as special enclosures.
Specifications
Ambient temperature [F (C)] -40°…135° (-40°…57°)
Power supply Models 60-1600B and 60-1610B:
102…132V, 50/60 Hz
Models 60-1601B and 60-1611B:
200…264V, 50/60 Hz
Power consumption 2 VA
Output relay
Standard, supplied with control base Plug-in with heavy-duty DPDT contact:
5 A at 120V AC, non-inductive
2.5 A at 240V AC, non-inductive
Solid state output accessories
Order separately #8-651 1 A, 120V AC, Triac output
#8-652 30 mA, 120V AC/DC, F.E.T. output
#63-116 Voltage signal logic output
#63-115 Open collector logic output