Additional resources, European union directive compliance – Rockwell Automation 6177R-Mxxx Industrial Non-display Computers User Manual
Page 3
Industrial Non-display Computers 3
Rockwell Automation Publication 6177R-IN001G-EN-P - July 2013
Additional Resources
These documents contain additional information concerning related Rockwell Automation
products.
You can view or download publications at
To order paper copies of technical documentation, contact your local Rockwell Automation
distributor or sales representative.
European Union Directive Compliance
This product meets the European Union Directive requirements when installed within the European
Union or EEA regions and have the CE mark. A copy of the declaration of the conformity is
available at
.
Resource
Description
Industrial Non-display Computers, User Manual,
publication
Provides details about how to install and operate the non-display
computers, and specifications.
Industrial Automation Wiring and Grounding
Guidelines, publicatio
Provides general guidelines for installing a Rockwell Automation industrial
system.
Product Certifications website,
Provides declarations of conformity, certificates, and other certification
details.
ATTENTION: This product is intended to operate in an industrial or control room environment,
which uses some form of power isolation from the public low-voltage mains. Some computer
configurations may not comply with the EN 61000-3-2 Harmonic Emissions standard as specified
by the EMC Directive of the European Union. Obtain permission from the local power authority
before connecting any computer configuration that draws more than 75 W of AC power directly
from the public mains.
To comply with EN 55024 and EN 61000-6-2, the Ethernet port LAN cable must be less than 30 m
(98.42 ft), used only indoors, and not exit the building at any point. All other I/O cables must be
less than 3 m (9.84 ft) and used only indoors.