Rockwell Automation 6177R-Mxxx Industrial Non-display Computers - Manual (Page 12)

12 Industrial Non-display Computers
Rockwell Automation Publication 6177R-IN001G-EN-P - July 2013
Mount the 750R Computer on a Machine
You can mount the 750R computer, catalog number 6177R-M4, on any flat surface, such as a
shelf, inside a machine, or against a wall by using mounting brackets.
Follow these steps to mount the 750R computer.
1. Attach the two mounting brackets to the computer by using six screws.
There are two location options: the computer’s bottom-side for an upright installation,
or the side cover for a wall installation.
2. Drill four holes in the shelf or wall that correspond to the holes in the mounting bracket.
The recommended screw size is M6…M8.
Mounting Brackets
(on the computer’s bottom side)
Mounting Brackets
(on the computer’s side cover)
Mounting Bracket Dimensions
(bottom side)
Mounting Bracket Dimensions
(side cover)
184 (7.24)
198 (7.80)
38
1
(1
5.
01
)
24
0
(9
.4
5)
70
.5
20
(0
.7
9)
39
4
(1
5.
51
)
38
0
(1
4.
96
)
240 (9.45)
381 (15.01)
70.5
Dimensions are in mm (in.).