Rockwell Automation 6180 Removable Media CD ROM Floppy Drives (for 6180 Industrial Computers) - Manual

Removeable Media
CD ROM & Floppy Disk Drives
(For 6180 Industrial Computers)
This document shows how to remove or install a floppy disk drive or
CD ROM drive in the accessory drive bay of the 6180 Industrial
Computer. Instructions for operation of a CD ROM drive are
provided along with floppy and CD ROM drive specifications. For
additional information on mounting brackets and covers, refer to the
6180 Industrial Computer Accessory Mounting Brackets and Covers
publication.
Internal 6180 Computer components may be damaged by
Electrostatic Discharge (ESD). Make sure you wear a grounding
strap whenever handling circuit boards, memory modules or other
internal components.
!
ATTENTION: Wear a wrist strap (well grounded)
and perform work in a static safe environment.
Electrostatic discharge can damage the 6180 Computer
and components.
Also observe the following precautions:
•
Always handle the drive by its metal frame.
•
Always store a drive in an anti-static bag when it is not installed.
•
Avoid touching the cable connectors.
•
Never disconnect or connect a drive with the power
turned on.
If you are installing or removing a CD ROM drive, the following
precautions apply.
!
ATTENTION: The CD ROM contains a laser system.
To ensure proper use of this product, please read this
instruction manual carefully and retain for future
reference. Should the unit ever require maintenance,
contact an authorized service location.
Use of controls, adjustments or the performance of
procedures other than those specified may result in
hazardous radiation exposure.
To prevent direct exposure to laser beam, do not open
the enclosure.
Instructions
Safety Precautions