beautypg.com

Rockwell Automation 6180P-xxxx Integrated Display Computers with Keypad Installation Instructions User Manual

Page 14

background image

14 Industrial Integrated Display Computers with Keypad

Rockwell Automation Publication 6180P-IN001C-EN-P - July 2013

The battery life depends on the amount of time the
computer is powered on. The table lists the estimated life
span of the battery.

If the computer does not display the correct time and date,
replace the battery.

Follow these steps to replace the RTC battery.

1. Perform the pre-configuration procedure.

a. Turn off the computer and all of the peripherals connected to it.

b. Unplug all cables from the power outlets to avoid exposure to high energy levels.

If necessary, label each one to expedite reassembly.

c. Disconnect telecommunication cables to avoid exposure to shock hazard from

ringing voltages.

2. Remove the back cover.
3. Lay the computer on its front (components showing).
4. If necessary, remove any accessory boards or cables that prevent access to the RTC

battery socket.

5. Remove the battery.

a. Insert a small flat-blade screwdriver between the battery and spring latch to dislodge

the battery from its socket.

ATTENTION: A risk of fire and chemical burn exists if the battery is not handled properly.

Do not disassemble, crush, puncture, or short external contacts.

Do not expose the battery to temperatures higher than 60 °C (140 °F).

Do not dispose of a used battery in water or fire.

For safety information on handling lithium batteries, see Guidelines for Handling Lithium
Batteries, publication

AG-5.4

.

WARNING: To prevent voiding your product warranty, use only Allen-Bradley approved
replacement parts and accessories.

IMPORTANT

When installing hardware or performing maintenance procedures that require access to
internal components, we recommend that you first back up all computer data to avoid loss.

IMPORTANT

Do not bend the spring latch when replacing the RTC battery. For proper operation, the latch
must retain contact with the battery.

On-time

Expected Battery Life

0 hours/week

4 years

40 hours/week

5.5 years

80 hours/week

7 years