Rockwell Automation 6001-F2E AB STANDARD DRIVER SFTW - Manual (Page 56)

Index
I I–1
A
Application Library Files, 2-2
Application Program
Compiling, Linking, and Configuring, 5-1
Examples, A-1
diagnostic counter read, A-10
diagnostic counter reset, A-14
diagnostic loop back, A-8
diagnostic status, A-12
plc-2 unprotected read, A-4
plc-2 unprotected write, A-6
sample program, A-1
Planning, 3-1
C
Command Set, Supported, B-6
Diagnostic Counters Reset, B-7
Diagnostic Loop, B-7
Diagnostic Read, B-8
Diagnostic Status, B-8
protected typed logical with three address fields, B-10
protected typed logical write with three address fields, B-12
Unprotected Read, B-9
Unprotected Write, B-9
Compatibility, Hardware and Software, 1-1
D
DH-485 Network, Communicating with the 6001-F2E on the, 4-2
Diagnostic Replies
Diagnosstic Status Reply, C-1
Diagnostic Status Reply
for APS software, C-3
for the SLC-5/01, C-1
Diagnostic Reply
Diagnostic Read Reply (Diagnostic Counters), C-4
Diagnostic Status Reply, for the 1784-KR, C-3
E
Error Codes, D-1
Local, D-1
Remote, D-2
Example Files, 2-3
F
Function Calls, 3-2
Appl_StdDrv(), message block data structure, 4-3
Appl_StdDrv(), using, 4-2
Close_StdDrv(), using, 4-7
Get_ErrMsg(), reading io_stat[0], 4-7
Get_ErrMsg(), using, 4-6
Open_StdDrv(), using, 4-1
Overview, 1-2
Send_StdDrv()
preventing reply messages from being lost, 4-6
specifying message packet commands, B-1
Send_StdDrv(), using, 4-4
G
Get_tns() Function, 4-6
I
Include Files, 3-1
io_stat[0], 4-7
M
Message Packet Fields, B-4
Message Packets, Formatting, B-1
communicating with slave-only devices, B-3
communicating with Token-passing devices, B-2
P
Programming Considerations, 3-2
S
Standard Driver Library Files, 2-2
Standard Driver Software
Considerations, 1-3
Contents of, 2-1
application library files, 2-2
example files, 2-3
standard driver library files, 2-2
Installing, 2-1
hardware, 2-3
software, 2-4
Product Overview, 1-1
Why you use it, 1-1