System requirements, Install controlflash, Prior to running controlflash – Rockwell Automation 1747-DU501 SLC 5/05 Processors Firmware/Operating System ControlFLASH Upgrade Installation User Manual
Page 3: Related publications
SLC 5/05 Processors Firmware/Operating System ControlFLASH Upgrade 3
Publication 1747-IN019G-EN-P - December 2011
Related Publications
To view and download PDF files, go to the Literature Library at
.
To order printed copies, contact your Allen-Bradley® Distributor or Rockwell Automation® Sales Office.
System Requirements
•
Personal computer with at least a 486 processor
•
Windows NT, 2000, or XP operating system
•
At least 32 MB of memory or the minimum required by the operating system
•
Ethernet connection to SLC processor
Install ControlFLASH
Insert the CD-ROM of the ControlFLASH Firmware Upgrade Kit into your CD-ROM drive. The Setup
Wizard appears to guide you through the installation process.
If a ControlFLASH directory does not yet exist, one is created in your Program Files directory.
Prior to Running ControlFLASH
For OS501 Series C FRN 9 and later, the SNMP Server must be enabled for the upgrade to occur. The
ability to disable the SNMP Server that was added in Series C FRN 9 and later, requires RSLogix™ 500
version 6.30 or higher.
For
Refer to this Document
Publication
A more detailed description on
how to install and use your
SLC™ 500 Modular Hardware
Style Control System.
SLC 500 Modular Hardware Style User Manua
A more detailed description on
how to install your SLC 500
Modular Processors.
SLC 5/03, SLC 5/04, and SLC 5/05 Modular Processors
Installation Instructions
A more detailed description on
ControlFLASH installation.
ControlFlash Firmware Upgrade Software User Manual
IMPORTANT
If an error is encountered during installation, uninstall the previous ControlFLASH firmware
from the computer and try again.