Rockwell Automation 1784-PM02AE PCI 2 Axis Servo Card - Manual

Publication 1784-IN005B-EN-P- July 2002
Installation Instructions
PCI 2 Axis Servo Card
(Catalog Number 1784-PM02AE)
This manual provides the instructions for installing the PCI 2 Axis
Servo card (1784-PM02AE) in a PC computer using the NT operating
system.
Before you install your card you should have a PC computer
meeting the following minimum configuration:
•
Open 32 bit Local PCI Bus slot
• Must be DMA capable and allow bus mastering on the PCI
Bus.
Category Requirement
Personal computer Pentium II 300MHz or Celeron 300A processor
Pentium III 450 MHz (or greater) recommended
Operating System Microsoft Windows NT version 4.0 with Service Pack 5
(or greater) or Microsoft Windows 2000 with Service Pack
1 (or greater)
RAM 128 Mbytes of RAM minimum
Hard Disk Space 50 Mbytes of free hard disk space
Video Requirements 256 - color, 800 X 600 video resolution minimum
See page:
Overview 2
Important User Information 2
Technical Support 3
Compliance to the European Union Directive 4
Preventing Electrostatic Discharge 5
Identifying Card Components 6
Installing the card 8
Termination Panel 10
DIN Rail 13
Cable Information 14