About the guardplc 1600 controller, General safety, Prevent electrostatic discharge – Rockwell Automation 1753-L28BBB-M_P GuardPLC 1600 Controllers User Manual
Page 3

3
Rockwell Automation Publication 1753-IN001C-EN-P - June 2010
About the GuardPLC 1600 Controller
The GuardPLC 1600 controller is a programmable electronic system featuring 20 digital inputs,
8 digital outputs, and 4 connections for GuardPLC Ethernet communication.
General Safety
Prevent Electrostatic Discharge
ATTENTION: Personnel responsible for the application of safety-related
programmable electronic systems (PES) shall be aware of the safety
requirements in the application of the system and shall be trained in using the
system.
ATTENTION: This equipment is sensitive to electrostatic discharge, which can
cause internal damage and affect normal operation. Follow these guidelines
when you handle this equipment:
•
Touch a grounded object to discharge static potential.
•
Wear an approved wrist-strap grounding device.
•
Do not touch connectors or pins on component boards.
•
Do not touch circuit components inside the equipment.
•
Use a static-safe workstation, if available.
•
Store the equipment in appropriate static-safe packaging when not in use.
Digital Outputs
Digital Inputs
Voltage Supply
Connection
Ethernet Ports (on top of controller)
Ethernet Ports (on bottom of controller)