Rockwell Automation 1734-TOP_TOPS_TOP3_TOP3S Point I/O Terminal Base Installation Instructions User Manual
Page 2
2
POINT I/O One-piece Terminal Bases
Publication 1734-IN028B-EN-P - April 2010
Important User Information
Solid state equipment has operational characteristics differing from those of
electromechanical equipment. Safety Guidelines for the Application, Installation and
Maintenance of Solid State Controls (publication
Rockwell Automation sales office or online at
portant differences
between solid state equipment and hard-wired electromechanical devices. Because
of this difference, and also because of the wide variety of uses for solid state
equipment, all persons responsible for applying this equipment must satisfy
themselves that each intended application of this equipment is acceptable. In no
event will Rockwell Automation, Inc. be responsible or liable for indirect or
consequential damages resulting from the use or application of this equipment.
The examples and diagrams in this manual are included solely for illustrative
purposes. Because of the many variables and requirements associated with any
particular installation, Rockwell Automation, Inc. cannot assume responsibility or
liability for actual use based on the examples and diagrams.No patent liability is
assumed by Rockwell Automation, Inc. with respect to use of information, circuits,
equipment, or software described in this manual. Reproduction of the contents of this
manual, in whole or in part, without written permission of Rockwell Automation, Inc.,
is prohibited. Throughout this manual, when necessary, we use notes to make you
aware of safety considerations.
WARNING
Identifies information about practices or circumstances that can
cause an explosion in a hazardous environment, which may lead
to personal injury or death, property damage, or economic loss.
IMPORTANT
Identifies information that is critical for successful application
and understanding of the product.