Rockwell Automation 1766-L32xxx MicroLogix 1400 Programmable Controllers Installation Instructions User Manual
Page 22
22 MicroLogix 1400 Programmable Controllers
Publication 1766-IN001C-EN-P - October 2009
1766-L32AWA
1766-L32AWAA
Group 0
Isolated relay output
VAC/DC0
OUT 0
Group 1
Isolated relay output
VAC/DC1
OUT 1
Group 2
Isolated relay output
VAC/DC2
OUT 2
Group 3
Isolated relay output
VAC/DC3
OUT 3
Group 4
Isolated relay output
VAC/DC4
OUT 4, OUT 5
Group 5
Isolated relay output
VAC/DC5
OUT 6, OUT 7
Group 6
Isolated relay output
VAC/DC6
OUT 8…11
1766-L32BXB
1766-L32BXBA
Group 0
Isolated relay output
VAC/DC0
OUT 0
Group 1
Isolated relay output
VAC/DC1
OUT 1
Group 2
FET output
VDC2/COM 2
OUT 2…7
Group 3
Isolated relay output
VAC/DC3
OUT 8
Group 4
Isolated relay output
VAC/DC4
OUT 9
Group 5
Isolated relay output
VAC/DC5
OUT 10, OUT 11
WARNING
If you connect or disconnect wiring while the field-side power is on, an electrical
arc can occur. This could cause an explosion in hazardous location installations.
Be sure that power is removed or the area is nonhazardous before proceeding
WARNING
The local programming terminal port is intended for temporary use only and
must not be connected or disconnected unless the area is free of ignitable
concentrations of flammable gases or vapors.
Output Terminal Grouping
Outputs
Controller
Output Group
Description
Voltage Terminal
Output Terminal