Mount the cable base, Armorblock maxum i/o cable bases series b 3 – Rockwell Automation 1792D-CB18PT ArmorBlock MaXum I/O Cable Bases Series B User Manual
Page 3

ArmorBlock MaXum I/O Cable Bases Series B 3
Publication 1792D-IN036B-EN-P - September 2000
Mount the Cable Base
The cable base can be mounted either vertically or horizontally, using
3 screws. Cable bases accommodate 4 or 8 point ArmorBlock MaXum
modules. You must allow additional space for installation of 8 point
ArmorBlock MaXum modules. They are longer than the 4 point
modules.
30798
When
installing a
cable base
with an 8
connector
module, allow
for the
additional
length.
1792D-CB18
1.35in
34.25mm
.764in
19.4mm
4.00in
101.5mm
.791in
20.1mm
1.34in
34mm
1.63in
41.5mm
6.10in
155mm
4 connector
module
8.23in
209mm
8 connector
module
1.90in
48.18mm
2.70in
68.5mm
1.42in
36mm
0.64in
16.25mm
0.26in
6.5mm
4.21in
107mm
This manual is related to the following products: