Rockwell Automation 1756-DMF30 ControlLogix Drive Module-Instructions - Manual (Page 5)

ControlLogix™ Drive Module 5
Publication 1756-IN577B-EN-P – July 2001
Low Voltage Directive
This product is tested to meet Council Directive 73/23/EEC Low
Voltage, by applying the safety requirements of EN 61131-2
Programmable Controllers, Part 2 – Equipment Requirements and
Tests.
For specific information required by EN 61131-2, see the appropriate
sections in this publication, as well as the following Allen-Bradley
publications:
•
Industrial Automation Wiring and Grounding Guidelines,
publication 1770-4.1
•
Automation Systems Catalog, publication B111
Open style devices must be provided with environmental and safety
protection by proper mounting in enclosures designed for specific
application conditions. See NEMA Standards publication 250 and IEC
publication 529, as applicable, for explanations of the degrees of
protection provided by different types of enclosures.
Power Requirements
This module receives power from the 1756 chassis power supply and
requires 2 sources of power from the backplane:
•
1.35A at 5.1V DC
•
3.0 mA at 24V DC
Add this current/power value (6.96 W) to the requirements of all
other modules in the chassis to prevent overloading the power
supply.