Rockwell Automation 1794-ACNR INSTL INSTR REDUNDANT MEDIA - Manual (Page 2)

FLEX I/O ControlNet Redundant Media Adapter 2
Publication 1794-5.18 – September 1996
European Union Directive Compliance
If this product has the CE mark it is approved for installation within the
European Union and EEA regions. It has been designed and tested to meet
the following directives.
EMC Directive
This product is tested to meet Council Directive 89/336/EEC
Electromagnetic Compatibility (EMC) and the following standards, in
whole or in part, documented in a technical construction file:
•
EN 50081-2EMC – Generic Emission Standard, Part 2 – Industrial
Environment
•
EN 50082-2EMC – Generic Immunity Standard, Part 2 – Industrial
Environment
This product is intended for use in an industrial environment.
Low Voltage Directive
This product is tested to meet Council Directive 73/23/EEC Low Voltage,
by applying the safety requirements of EN 61131–2 Programmable
Controllers, Part 2 – Equipment Requirements and Tests.
For specific information required by EN 61131-2, see the appropriate
sections in this publication, as well as the following Allen-Bradley
publications:
•
Industrial Automation Wiring and Grounding Guidelines For Noise
Immunity, publication 1770-4.1
•
Guidelines for Handling Lithium Batteries, publication AG-5.4
This equipment is classified as open equipment and must be mounted in
an enclosure during operation to provide safety protection.
B
C
A