Rockwell Automation 1734D-IB8XOB8 POINT I/O Installation Instructions - Manual (Page 9)

POINTBlock dc 8 Input/8 Output Module 9
Publication 1734-IN020A-EN-P - July 2001
Dimensions Inches
(Millimeters)
3.00H x 2.36W x 5.25L
(76.2 Hx 60.0W x 133.4L)
Environmental Conditions
Operational Temperature
Storage Temperature
Relative Humidity
Shock Operating
Non-operating
Vibration
-20 to +55 o C (-4 to +131 o F)
-40 to 85 o C (-40 to 185 o F)
5 to 95% noncondensing
30g peak acceleration, 11(±1)ms pulse width
50g peak acceleration, 11(±1)ms pulse width
Tested 5g @ 10-500Hz per IEC 68-2-6
Conductors Wire Size
Category
14 AWG (2.5mm 2 ) - 22 AWG (0.25mm 2 ) solid or
stranded max
3/64 inch (1.2mm) insulation max
2 1
Terminal Base Screw
Torque 5-7 pound-inches (0.5-0.6 Nm)
Field Wiring Terminations
DeviceNet
1 - Black Wire -V
2 - Blue Wire CAN Low
3 - Bare Wire Drain
4 - White Wire CAN High
5 - Red Wire +V
Field Power Supply 0 - No Connection 1 - No Connection
2 - No Connection 3 - No Connection
4 - Common 5 - Common
6 - Supply 7 - Supply
Mass 12.02 oz/340.77 grams
Agency Certification
(when product is marked) • C-UL Listed
• C-UL Class I, Division 2 Groups A, B, C and D
certified
• UL listed
• CE marked for all applicable directives
• C-Tick marked for all applicable acts
1 Use this conductor category information for planning conductor routing. Refer to publication
1770-4.1, “Industrial Automation Wiring and Grounding Guidelines for Noise Immunity.”