Rockwell Automation 1734D-IB8XOB8 POINT I/O Installation Instructions - Manual (Page 2)

2 POINTBlock dc 8 Input/8 Output Module
Publication 1734-IN020A-EN-P - July 2001
ATTENTION
!
Whatever field power you supply is connected to
the internal field-power bus. For example, if
120V ac is applied to the power connections,
there will be 120V ac applied to the modules
through the internal field-power bus.
POINT I/O modules to the right of the module
will also have that internal power bus voltage
applied, unless you use a 1734-FPD to interrupt
and change the field power-bus voltage.
CH
SH
24
CL
RT
En
CH
CL
GND
5V
DeviceNet
Connector
PointBus Expansion Port
(allows expansion of up to
12 POINT I/O modules)
Field Bus
Connector
24V
to 5V
Microprocessor
I/O Circuits
I/O Connections Power
Connections
41971
12/24V dc