beautypg.com

Rockwell Automation 1771-ICD DC(20-60V)Input Module Installation Instructions User Manual

Installation instructions

background image

Installation Instructions

Publication 1771-5.29 – February 2000

DC (20Ć60V) Input Module

Cat. No. 1771ĆICD Series B

This document provides information on:

important pre-installation considerations

power supply requirements

initial handling procedures

installing the module

using the indicators for troubleshooting

module specifications

The 1771-ICD series B module must be used in a series B 1771 I/O
chassis (1771-A1B through -A4B) or a 1771-AM or -AM1 chassis.
Make sure no other input module or single card block transfer
module is placed in the same module group when using 2-slot
addressing. Any discrete output module may be used within the same
module group.

European Union Directive Compliance

If this product is installed within the European Union or EEA
regions and has the CE mark, the following regulations apply.

EMC Directive

This apparatus is tested to meet Council Directive 89/336/EEC
Electromagnetic Compatibility (EMC) using a technical construction
file and the following standards, in whole or in part:

EN 50081-2

EMC – Generic Emission Standard, Part 2 –

Industrial Environment

EN 50082-2

EMC – Generic Immunity Standard, Part 2 –

Industrial Environment

The product described in this manual is intended for use in an
industrial environment.

Low Voltage Directive

This apparatus is also designed to meet Council Directive 73/23/EEC
Low Voltage, by applying the safety requirements of EN 61131–2
Programmable Controllers, Part 2 – Equipment Requirements and
Tests.

To The Installer

Pre-installation
Considerations