Rockwell Automation 1790D-XXXX DeviceNet Digital Base D-Shell Module CompactBlock LDX I/O - Manual (Page 19)

DeviceNet Digital Base D-Shell Block CompactBlock LDX I/O 19
Publication 1790-IN007C-EN-P - May 2006
Specifications
IMPORTANT
Input and output wiring must be in accordance with Class 1, Division 2 wiring
methods and in accordance with the authority having jurisdiction..
1790D-16BVO Universal dc Input Base Block
Attribute Value
Inputs per Module 16 point, sinking or sourcing
On-state Voltage 9.6V dc min, 24V dc nom, 28.8V dc max
Off-state Voltage 5.0V dc max
On-state Current 8 mA max per channel @ 28.8V dc
Input Impedance, Nom 4.8 k
Ω
Field Power Dissipation 3.68 W max @ 28.8V dc
Isolation Voltage 50V dc (continuous), reinforced insulation type,
tested at 1250V ac for 60 s, I/O to system
1790D-OW6 ac/dc Relay Output Block
Attribute Value
Relay Type Form A, normally open, single pole, single throw
Output Voltage Range (load
dependent) 5…24V dc @ 2.0 A resistive
30V ac @ 2.0 A resistive
Output Current Rating (at
rated power) 2.0 A @ 5…24V dc resistive
2.0 A @ 30V dc resistive
Load, Min 100 µA, 100 mV dc per point
On-state Voltage Drop, Max 0.5V @ 2.0 A, resistive load, 24V dc
Initial Contact Resistance 30 m
Ω
Expected Contact Life 300 kcycles resistive, 100 kcycles inductive
Off-state Leakage, Max 1.5 mA