beautypg.com

Rockwell Automation 1771-OQ/B Isolated 24V dc Output Module Installation Instructions User Manual

Rockwell Automation Equipment

background image

1

Publication 1771-IN081B-EN-P - June 2004

Installation Instructions

Isolated 24V dc Output Module

(Cat. No. 1771-OQ Series B)

Contents

Use this document as a guide when installing the catalog number 1771-OQ
Series B isolated dc output module.

Important User Information

Solid state equipment has operational characteristics differing from those of
electromechanical equipment. Safety Guidelines for the Application, Installation and
Maintenance of Solid State Controls
(Publication SGI-1.1 available from your local
Rockwell Automation sales office or online at http://www.ab.com/manuals/gi)
describes some important differences between solid state equipment and hard-wired
electromechanical devices. Because of this difference, and also because of the wide
variety of uses for solid state equipment, all persons responsible for applying this
equipment must satisfy themselves that each intended application of this equipment is
acceptable.
In no event will Rockwell Automation, Inc. be responsible or liable for indirect or
consequential damages resulting from the use or application of this equipment.
The examples and diagrams in this manual are included solely for illustrative purposes.
Because of the many variables and requirements associated with any particular
installation, Rockwell Automation, Inc. cannot assume responsibility or liability for
actual use based on the examples and diagrams.
No patent liability is assumed by Rockwell Automation, Inc. with respect to use of
information, circuits, equipment, or software described in this manual.
Reproduction of the contents of this manual, in whole or in part, without written
permission of Rockwell Automation, Inc. is prohibited.

To

See page

Important User Information

1

Preinstallation Considerations

3

Set the Jumper Configuration

3

Calculate Power Requirements

4

Key the Backplane Connector

5

Install the Field Wiring Arm

5

Connect Wiring to the Field Wiring Arm

6

Interpreting the Status Indicators

8

Replacing the Fuses

8

Specifications

9