Rockwell Automation 1792D-8BVT8CD ArmorBlock MaXum 8 Input/8 Output Module with Complete Diagnostics - Manual

1 Publication 1792D-IN020B-EN-P - September 2000
Installation Instructions
ArmorBlock MaXum 8 Input / 8 Output
Module Series B
(Cat. No. 1792D-8BVT8D)
This ArmorBlock MaXum™ I/O module (Cat. No. 1792D-8BVT8D) is a
stand-alone 24V dc I/O product which communicates via a DeviceNet™
network. The sealed housing of this module requires no enclosure.
This model has 8 inputs and 8 outputs accessed through Y splitter cables.
Inputs are 24V dc automatically configured for PNP (sourcing) or NPN
(sinking) devices. Eight self-protected 24V dc outputs can provide up to 0.5
amp each. Diagnostic features are short circuit, open wire, and no load
detection reported to the point level. Local logic control has been added to
the Series B version of this product.
I-4 O-4
I-5 O-5
I-2 O-2
I-3 O-3
I-0 O-0
I-1 O-1
I-6 O-6
I-7 O-7
Net/Mod Status
Logic Status
Auxilary Power
41516