Rockwell Automation D17846.2.4 CONTROLNET KT EMULA - Manual (Page 2)

Important User Information Because of the variety of uses for the products described in this publi-
cation, those responsible for the application and use of this control
equipment must satisfy themselves that all necessary steps have been
taken to assure that each application and use meets all performance
and safety requirements, including any applicable laws, regulations,
codes and standards.
The illustrations, charts, sample programs and layout examples
shown in this guide are intended solely for example. Since there are
many variables and requirements associated with any particular
installation, Allen-Bradley does not assume responsibility or liability
(to include intellectual property liability) for actual use based upon
the examples shown in this publication.
Allen-Bradley publication SGI-1.1, Safety Guidelines for the Applica-
tion, Installation and Maintenance of Solid State Control (available
from your local Allen-Bradley office) describes some important
differences between solid-state equipment and electromechanical
devices which should be taken into consideration when applying
products such as those described in this publication.
Reproduction of the contents of this copyrighted publication, in
whole or in part, without written permission of Allen-Bradley
Company, Inc., is prohibited.
Throughout this manual we use notes to make you aware of safety
considerations:
Attention helps you to:
• identify a hazard
• avoid the hazard
• recognize the consequences
Important: Identifies information that is critical for successful appli-
cation and understanding of the product.
ControlNet is a trademark of ControlNet International.
Data Highway Plus, DH+ and PLC-5 are trademarks and PLC-2 and PLC-3 are registered trademarks of Allen-Bradley Company,
Inc.
!
ATTENTION: Identifies information about practices
or circumstances that can lead to personal injury or
death, property damage, or economic loss.