beautypg.com

Usage with interrupts, Table 2.b bit values for configuring the dual-port, Ktcx card shutdown – Rockwell Automation D17846.2.4 CONTROLNET KT EMULA User Manual

Page 19: Write an ffh into byte offset 0004h (ktcx link, Write an 01h into byte offset 0014h (ktcx_off_k, Wait until byte offset 0015h (ktcx_stopped_flag, Write a 01h into byte offset 803h, Write a 04h into byte offset 0012h, Write a 00h into byte offset 014h, Restarting the ktcx card after shutdown

Usage with interrupts, Table 2.b bit values for configuring the dual-port, Ktcx card shutdown | Write an ffh into byte offset 0004h (ktcx link, Write an 01h into byte offset 0014h (ktcx_off_k, Wait until byte offset 0015h (ktcx_stopped_flag, Write a 01h into byte offset 803h, Write a 04h into byte offset 0012h, Write a 00h into byte offset 014h, Restarting the ktcx card after shutdown | Rockwell Automation D17846.2.4 CONTROLNET KT EMULA User Manual | Page 19 / 48 Usage with interrupts, Table 2.b bit values for configuring the dual-port, Ktcx card shutdown | Write an ffh into byte offset 0004h (ktcx link, Write an 01h into byte offset 0014h (ktcx_off_k, Wait until byte offset 0015h (ktcx_stopped_flag, Write a 01h into byte offset 803h, Write a 04h into byte offset 0012h, Write a 00h into byte offset 014h, Restarting the ktcx card after shutdown | Rockwell Automation D17846.2.4 CONTROLNET KT EMULA User Manual | Page 19 / 48
See also other documents in the category Rockwell Automation Equipment: