Rockwell Automation 1771-CFM Config. Flowmeter Installation Instructions User Manual

Page 2

Configurable Flowmeter Module

Publication 1771ĆIN043B-EN-P - July 2002

Allen–Bradley publication SGI–1.1, Safety Guidelines for
Application, Installation, and Maintenance of Solid–State Control
(available from your local Rockwell Automation office), describes
some important differences between solid–state equipment and
electromechanical devices that should be taken into consideration
when applying products such as those described in this publication.

Reproduction of the contents of this copyrighted publication, in
whole or part, without written permission of Rockwell Automation,
is prohibited.

Throughout this publication, notes may be used to make you aware
of safety considerations. The following annotations and their
accompanying statements help you to identify a potential hazard,
avoid a potential hazard, and recognize the consequences of a
potential hazard.

WARNING

Identifies information about practices or
circumstances that can cause an explosion in a
hazardous environment, which may lead to
personal injury or death, property damage, or
economic loss.

ATTENTION

Identifies information about practices or
circumstances that may lead to personal injury or
death, property damage, or economic loss.

IMPORTANT

Identifies information that is critical for
successful application and understanding of the
product.