Rockwell Automation 873P Ultrasonic Single Analog Output Sensors Installation Instructions - Manual

Rockwell Automation 873P-IN005A-EN-P—October 2014
Installation Instructions
Ultrasonic Single Analog Output Sensors
Specifications
 AV–Analog voltage (0…10V DC) or AI–Analog current (4…20 mA)
 Metallic target 100 x 100 mm (3.94 x 3.94 in.)
 Metallic target 200 x 200 mm (7.87 x 7.87 in.)
 Metalic target 400 x 400 mm (15.75 x 15.75 in.)
Model 873P-D18-400-D4 873P-D18-900-D4 873P-D18-2200-D4 873P-D30-2500-D4 873P-D30-3500-D4 873P-D30-6000-D4
Certifications cULus Listed and CE Marked for all applicable directives
Rated Sensing Distance
50…400 mm 
(1.97…15.7 in.) 100…900 mm 
(3.94…35.4 in.) 200…2200 mm 
(7.87…88.6 in.) 200…2500 mm 
(7.87…98.4 in.) 250…3500 mm 
(9.87…137.8 in.) 350…6000 mm 
(13.8…236.2 in.)
Teachable Sensing Range
100…400 mm 
(3.94…15.7 in.)
100…900 mm  200…2200 mm  200…2500 mm  250…3500 mm  350...6000 mm 
Blind Zone
0…50 mm
(0…1.97 in.) 0…100 mm
(0…3.94 in.)
0…200 mm 0…200 mm 0…250 mm 0...350mm
Beam Angle ±8° ±7° 14° ±1° 15° ±2°
Sensitivity Adjustment Push button
Linearity <1% of full scale value
Resolution 1 mm (0.04 in.) 2 mm (0.08 in.) 3 mm (0.12 in.) 2 mm (0.08 in.) 4 mm (0.16 in.) 6 mm (0.24 in.)
Accuracy 0.1% of sensing range
Hysteresis <1% of full scale value
Ripple 5%
Current Consumption ≤50 mA
Output Type  AV or AI
Transducer Frequency 300 kHz 200 kHz 150 kHz 112 kHz 75 kHz
Response Time 500 ms 600 ms
Time Delay before Availability ≤900 ms ≤1400 ms
Electrical Protection Polarity reversal, transient noise, short circuit, overload
Minimum Load (analog voltage) 3 kΩ
Maximum Current (analog voltage output) 40 mA
Temperature Range -20…+60° C (-4…+140° F) -20…+70° C (-4…+158° F)
Temperature Compensation Yes
Temperature Drift ±5%
Housing Material Plastic—PBT
Active Head Material Epoxy—glass resin
Ingress Protection Rating IP67 (EN 60529)
Operating Voltage Catalog Numbers
12…30V DC 873P-D30AI-2500-D4, 873P-D30AI-3500-D4, 873P-D30AI-6000-D4
15…30V DC
873P-D18AV-400-D4, 873P-D18AI-400-D4,
873P-D18AV-900-D4, 873P-D18AI-900-D4,
873P-D18AV-2200-D4, 873P-D18AI-2200-D4, 873P-D30AV-2500-
D4, 873P-D30AV-3500-D4, 873P-D30AV-6000-D4
The 873P sensor is a one set point mode with a
maximum sensing range from the factory.
IMPORTANT: SAVE THESE INSTRUCTIONS FOR FUTURE USE.
IMPORTANT